DIRECTIONS FOR
USE:
PERpose™ Plant
& Soil Oxygen Enhancer oxygenates plants and soils and will
maintain healthy plant roots, while allowing a more efficient movement
of oxygen and nutrients. PERpose™ can also reduce the problems
associated by over watering of plants. PERpose™ can be
applied as a foliar and/or soil drench, into the root zone.
Compatibility
Do not use at higher than recommended
application rates as leaf burn may result. PERpose™ Plant and
Soil Oxygen Enhancer provides a source of activated oxygen applied directly
over plant surfaces and into the soil, and has been shown not to cause
adverse cosmetic effects on most plants.
Solution Preparation
PERpose™ works best when diluted with water containing low levels of organic,
or inorganic materials, and having a neutral pH.
Thoroughly rinse out mixing tank with
water before mixing concentrate, or residues may cause product to lose
effectiveness.
1. PERpose™
will readily mix with clean, neutral water and does not require agitation.
2. PERpose™
concentrate must not be combined or mixed with any other pesticide or
fertilizer. 3. Do
not reuse already mixed solution; make fresh daily.
4. Prepare
a solution by filling the tank with the required volume of water and
then adding concentrate as required.
For use as an Oxygen Enhancer on plant
material and in soils, including bedding plants, flowering
plants, roses, poinsettia, ornamentals, nursery stock, trees, turf,
bulbs, seedlings, seeds, and seedbeds, etc.
For oxygen enhancement of plants and
soils PERpose™
applied through injectors, misting systems, sprayers, irrigation and
chemigation systems, will maintain healthy plant roots. Another
side benefit is the reduction/elimination of mineral crustation (Scale
build-up) in lines, filters, mist/fog heads, tanks, cool pads, etc.
For irrigation systems, Including (flooded
floors, flooded benches, recycled water systems, and misting systems).
Treat water with ¾ to 1 gallon of product
per 10,000 gallons of water.
For soil application during mist propagation
of plugs, inject PERpose™ into the misting system.
Inject PERpose™ using a 1:5,000 dilution and maintain cycle.
Using PERpose™
as a soil drench.
Used as a soil drench at the time of
seeding or transplanting, as well as a periodic drench, will maintain
healthy plant roots. PERpose™ can also be used on potting
soil and growing medium prior to planting.
1. Use 1 fl. oz. per gallon of water.
2. Apply to soil or growing media to the point of saturation.
PERpose ™Applied into the soil via
foliar application in greenhouses.
Foliar application with PERpose™ directly
over plant material is an excellent method of supplying additional oxygen
as it runs down leaves, flowers and stems and into the soil.
Applying PERpose™ over ornamentals, bedding plants, flowering plants,
shrubs and trees will maintain healthy plant roots.
Initial Application:
1. Use ¾ fl. oz per gallon of water.
2. Spray, or mist, over plants and into the soil in early morning or
late evening for best results.
Weekly soil application:
1. Use ½ fl. oz. per gallon of water.
2. Spray weekly for best results.
PERpose™ applied as a foliar spray
treatment in the field
Foliar application is just another
method for soil application. Apply PERpose™ into the soil, directly
over nursery stock, such as woody ornamentals, bedding plants, flowering
plants, roses, container plants, azaleas, rhododendrons, conifers and
shade trees, to maintain healthy plant roots.
Initial Application:
1. Use 1 fl. oz. per gallon of water.
Weekly application:
1. Use 1/2 fl. oz. per gallon of water.
2. Spray, or mist, over plants and trees, and into the soil. Application
can be done through irrigation or chemigation systems.
3. Apply weekly for best results.
For seedbed treatment, apply PERpose™ prior to sowing
seed.
Use 1 ½ fl.
oz. per gallon of water. Thoroughly wet or drench the seedbed to the
point of saturation, with 60 to 100 gallons of dilute solution per 1000
square feet. Let set for one hour, then immediately seed soil.
After seeds have germinated, use 1/2 fl. oz. per gallon of water. Lightly
spray or irrigate the soil and seedlings until thoroughly wetted. For
best results, apply weekly until seed is well established.
Turf applications using PERpose™, to maintain healthy turf roots.
For use
on all turf types such as commercial turf, lawns, athletic fields, golf
course fairways, greens and tees.
1. Dilute 1 fl. oz. per gallon of water.
Apply 1 – 5 gallons of dilute solution per 1000 square feet.
2. Repeat applications
weekly, preferably after grass has been cut, and early in the morning,
or late afternoon, for best results. Applications can be made
during wet or rainy weather. PERpose™ can be injected through automatic
irrigation systems on turf.
PERpose™ reduces/eliminates scale build
up in pipes,
holding tanks, fog/mist heads and filters. PERpose™ will
reduce/eliminate scale build up in water and is environmentally friendly.
To reduce/eliminate scale build up, PERpose™ can be used through
injectors, mist/fog systems, sprayers, irrigation and chemigation systems.
PERpose™, used at suggested dilutions, is not harmful
to animals, plants, or humans, even with long-term exposure.
For evaporative coolers:
To reduce/eliminate scale build up on pads, add PERpose™ concentrate
to the water initially with a 1:50 dilution and apply to pads.
To reduce/eliminate scale build up on pads, add PERpose™ concentrate
to re-circulating cooler water weekly with a dilution of 1:500, or 1/4
oz. for each gallon of cooler water.
For Irrigation
Systems: To reduce/eliminate scale build
up in recycled water systems, humidification systems, mist/fog systems
and cool pads, add PERpose™ concentrate to existing water initially
with a dilution of 1:500, or ¼ oz. per gallon of water. Add PERpose™
concentrate to re-circulating water weekly, with a dilution rate from
1:1000 up to 1:10,000. PERpose™ test strips are recommended
to maintain desired PPM.
Please see our
web site: http://www.perpose.com/
for more information.
Warranty
This material
conforms to the description on the label and is reasonably fit for the
purposes referred to in the directions for use. Buyer assumes all risks
associated with the use, storage or handling of this material. TO THE
EXTENT ALLOWABLE BY STATE LAW, NO OTHER EXPRESS OR IMPLIED WARRANY OF
FITNESS OR MERCHANTABILITY IS MADE.
Product
Storage
Avoid
damage to containers. Keep container closed at all times when
not in use. Keep container out of direct sunlight. To maintain product
quality, store at temperatures below 86 degrees. Do not store on wooden
pallets.
NEVER
RETURN PERpose™ TO THE ORIGINAL CONTAINER, AFTER IT HAS BEEN REMOVED.
Avoid all contaminants, especially dirt,
caustic reducing agents, and metals. Contamination and impurities will
reduce shelf life and can induce decomposition. In case of decomposition,
isolate container, douse container with cool water and dilute produce
with large volumes of water.
Container
Disposal
Empty drums are not returnable to A Growing Alternative, Inc.
Triple rinse drums with water. For more information see Material Safety
Data Sheet.
| Available
in: |
5 |
15 |
30 |
55 |
gallon drums |
| |
18.93
Liter |
56.88
Liter |
113.56
Liter |
208.19
Liter |
|
